Fiber Optic Installation · Chicagoland

Commercial Fiber Optic Installation for Offices and Warehouses

We run fiber between your main distribution frame (MDF) and every switch closet in the building, so your network backbone is fast, clean, and built to last.

Call (630) 397-8172Schedule a Free Site Visit

Every fiber project starts with a free on-site walkthrough.

  • Free site visit
  • Multimode and single-mode
  • Racks and patch panels
  • Serving all of Chicagoland

What is in-building fiber optic installation?

Strategica IT Solutions installs fiber optic backbone cabling inside commercial buildings across Chicagoland. We connect the main distribution frame (MDF), where your internet and core network equipment live, to intermediate distribution frames (IDFs) and switches throughout an office or warehouse. Fiber carries data much farther than copper Ethernet, which is limited to 100 meters per run, so it's the standard choice for linking network closets in large or multi-floor buildings.

Where fiber fits in your network

MDFInternet, firewall, core switchIDFSwitch closet: Floor 2IDFSwitch closet: Warehouse AIDFSwitch closet: Warehouse B
Fiber backboneCopper to devices
Fiber links your closets together, and copper Ethernet handles the last stretch to each device.

What's included

MDF-to-IDF backbone runs

Fiber between your main network room and every switch closet, routed cleanly through ceilings, conduit, or cable tray.

Multimode fiber (OM3/OM4)

The usual choice for in-building runs, supporting 10 Gbps up to 300–400 meters.

Single-mode fiber (OS2)

For the longest runs in large warehouses and campuses, with room to grow to higher speeds later.

Racks and enclosures

Wall-mount and floor racks and fiber enclosures, installed and organized.

Patch panels and cable management

Neat patching, managers, and slack storage, so changes later are quick and safe.

Labeling and documentation

Every strand and port labeled, plus a map of what connects where, handed to you at the end.

Built for warehouses and offices

Warehouses and distribution centers

  • Cover distances copper can't, from the office to the far end of the building
  • Connect switches that power scanners, Wi-Fi, cameras, and dock stations
  • Route along structure and high ceilings, away from forklift traffic
  • Plan capacity for future automation and more access points

Offices and multi-floor buildings

  • Link switch closets between floors with a high-speed backbone
  • Replace aging copper uplinks that bottleneck your network
  • Clean, labeled closets your team or your IT provider can work in
  • Pair the new backbone with our network and firewall services

Multimode vs. single-mode vs. copper

Cable typeTypical useMax distance at 10 Gbps
Copper (Cat6A)Desk and device connections100 m (328 ft)
Multimode fiber (OM3)Backbone between nearby closets300 m (984 ft)
Multimode fiber (OM4)Longer in-building backbone400 m (1,312 ft)
Single-mode fiber (OS2)Very long runs and future upgrades10 km (6.2 mi)

Not sure which one you need? We'll recommend the right cable during your free site visit.

How it works

  1. 1

    Call or send a request

    Call us or fill out the form, and we'll schedule a visit to your building.

  2. 2

    Free site visit

    We walk the building, find your MDF and switch closets, and measure the cable routes.

  3. 3

    Written quote

    You receive a clear scope and price based on what we found on site.

  4. 4

    Install and hand-off

    We pull, terminate, and patch the fiber, confirm each link on your switches, then hand over labeled closets and documentation.

Fiber optic installation FAQ

The MDF (main distribution frame) is the central room where your internet connection, firewall, and core switch live. IDFs (intermediate distribution frames) are the smaller switch closets spread through the building. Fiber is the backbone that ties them together.

Copper Ethernet is limited to 100 meters (328 feet) per run. If any switch closet is farther than that from your MDF, or you need high-speed uplinks between floors, fiber is the right choice. Inside a single room or a small office, Cat6A is usually enough.

Multimode (OM3 or OM4) covers most in-building runs and supports 10 Gbps up to 300–400 meters. Single-mode (OS2) is for very long runs or when you want the most room for future speed upgrades. We'll recommend one after measuring your routes.

Not an accurate one. Fiber pricing depends on cable routes, distances, and building conditions, so every quote starts with an on-site walkthrough. Call (630) 397-8172 to schedule a free one.

Yes. The walkthrough and the written quote that follows are free, with no obligation.

Yes. Warehouses are one of our main focus areas, because their size often puts switch closets beyond copper's 100-meter limit.

We install fiber for businesses across Chicagoland, including Cook, DuPage, Kane, Will, Lake, McHenry, and Kendall counties. Our office is in Batavia, IL.

Yes. Strategica is an IT company, so the same team that runs your fiber can help with IT support, firewall setup, and VPNs, giving you one partner for the whole network.

Schedule your free site visit

Call us to set up a walkthrough, or send your details and we'll call you back to schedule it.

(630) 397-8172

or send a request

Send Us a Message

info@strategicaitsolutions.com
Call for a free site visit